Inspection Equipment Calibration All inspection measuring devices and control instruments shall be calibrated at regular intervals sufficient to assure the required accuracy at all times. A card file will be maintained by Quality Control to record a calibration record for each device. Each device will be identified with a numbered sticker to relate to the calibration card of the particular instrument/device. Master equipment shall be calibrated by sources capable of traceability to the National Bureau of Standards. The Calibration System shall be in accordance with MIL-C-45662A. Back to QC Table of Contents This page is best viewed with a screen resolution of 800x600 or higher with Netscape 4.0 or Internet Explorer 4.0.