Sampling Plan This sampling plan is applicable to receiving inspection, in-process inspection and final inspection. The chart, as follows, is based upon normal operations assuming the equipment is capable of holding the required tolerances. In the event there are other circumstances such as tight tolerances, difficult material or operations that are historically difficult to produce, the inspector will initiate a tighter inspection plan as required. The customer may establish the sampling plan as per purchase order and specification requirements. If a tightened sample plan is determined necessary, this shall be noted on the reverse side of the Manufacturing Operations Sheet. Back to QC Table of Contents This page is best viewed with a screen resolution of 800x600 or higher with Netscape 4.0 or Internet Explorer 4.0.